Filter assembly
The filter assembly before and after cleaning suitable accessible components.
Drag to compare. Use arrow keys when focused.
MORE THAN A WIPE-DOWN
Vacuum deep cleaning in Salt Lake City.
Dust can sit behind a clean-looking bin, around the cyclone, in air paths and inside the cleaner head. A deep clean reaches suitable components that ordinary emptying leaves behind.
Request serviceMain Unit Deep Clean.
Main Unit Deep Clean covers the cordless main motor/body assembly, dustbin, cyclone and applicable accessible internal components only. It excludes the wand, cleaner head and accessories. Dyson V6 / V7 / V8 and standard cordless are $49.00; Dyson V10 / V11 / V12 / V15 is $69.00. Robot vacuum is $29.00; robot vacuum/mop is $39.00, excluding the dock. Corded uprights, wet/dry shop vacuums and wet/dry floor washers have one Complete Deep Clean package. Other / Not Sure receives a manually confirmed quote.
Ask for a main vacuum deep cleanWe check your model and condition, then disassemble suitable components to reach trapped dust. The scope can include the bin, cyclone and shroud, accessible internal air passages, filters and seals. Not every component is washable or intended to be dismantled.
Debris is removed using methods appropriate to the part. Suitable washable components are cleaned and fully dried before reassembly. Washable filters are cleaned only according to the manufacturer’s guidance. Non-washable filter media is kept dry; detergents, alcohol, degreasers and seal-care products are not applied to it. Suitable seals are inspected and can receive compatible dry-to-the-touch protectant where appropriate; seal care does not guarantee longer life. The vacuum is reassembled, exterior-detailed and functionally tested, including the standard battery check.
We use 91% isopropyl alcohol only on suitable, material-compatible hard surfaces where appropriate. It can help remove certain surface residue and paint-transfer marks. We check the material, finish and manufacturer’s guidance first; alcohol is not suitable for every plastic, rubber or coating. It is kept off electronics, motors, batteries and filter media. This is careful cleaning, not hospital-grade sterilization.
Electronic and powered parts are not immersed in water. Motors, batteries and electrical assemblies need different treatment from loose washable parts. Damaged filters or seals may need replacement, which is quoted separately.
Powered cleaner-head cleaning — $20.00 each.
The head needs its own attention: hair and thread around a brush can hide debris beneath it. Where the model permits, the brush bar is removed, hair, thread and trapped buildup are cleared, and accessible internal areas and suitable components receive careful cleaning or degreasing before reassembly and testing. The cleaner head is included in cordless Complete Deep Clean; the integrated head is included in upright Complete Deep Clean; additional powered heads are $20.00 each, with complex or damaged items individually quoted; this is separate from main-assembly-only cleaning.
Only components confirmed safe for the model receive wet cleaning or degreasing. A powered housing is not put in a wash bath. Worn bearings, broken joints, damaged contacts or failed motors need diagnosis rather than more cleaning.
Cleaner head not spinning? Start here.Standard accessories / wands — $2.50 each.
Tell us how many powered heads and mini motorized tools you want serviced. Additional powered heads are $20.00 each. Standard non-powered accessories or wands are $2.50 each; mini motorized tools are individually quoted. Loose washable accessories can receive hand-washing or suitable degreasing where appropriate; electronic parts are kept out of the water.
If you want only the main body, one head or a particular accessory cleaned, describe that scope in your request. We confirm what is included and its price before starting.
Request just a head or accessory cleanComplete Deep Clean.
Cordless Complete Deep Clean covers the main body, wand, cleaner head and up to two accessories, with appropriate cleaning, reassembly and functional testing. Dyson V6 / V7 / V8 and standard cordless are $75.00; Dyson V10 / V11 / V12 / V15 is $95.00.
Corded upright Complete Deep Clean is $69.00 and covers the main machine, integrated cleaner head, brushroll, accessible hose and up to two supplied accessories where applicable, with reassembly and testing. Wet/dry shop vacuum is $39.00 for the canister, safely serviceable motor/lid, flexible hose and up to two attachments, with reassembly and testing. Wet/dry floor washer (vacuum mop) is $59.00 for the main assembly, accessible water tanks, floor-cleaning head, brush roller and safely serviceable dirt/water pathways, with functional testing.
Robot vacuum Complete Deep Clean is $49.00 for the robot AND its accompanying dock, including applicable accessible self-emptying components when supplied. Robot vacuum/mop Complete Deep Clean is $69.00 for the robot/mop AND its washing station, including appropriate accessible washing and dust-collection components. Dock cleaning is included when supplied. Other / Not Sure receives a manually confirmed quote.
Heavy or unusual buildup may require more work. We tell you before additional work or charges are approved. Replacement parts, repairs, transport and the optional $12.00 Clear-Bin Refinishing add-on are separate.
Maintenance Refresh: A category-priced Maintenance Refresh includes limited disassembly, bin cleaning, accessible interior debris removal, suitable exterior degreasing and detailing, filter and seal care, reassembly, a final wipe-down and basic airflow, operation and performance checks. It does not include full internal disassembly or a full accessory deep clean.
Extended battery runtime test · $10.00.
Controlled charging and discharging records the power mode, tool configuration, measured runtime, charging completion and abnormal shutdowns. This is separate from basic battery checks and does not certify exact battery health or guarantee future life.
Real work, clearly shown.
These are original workshop photographs. The slider changes how you view the pair, not the condition shown in either image.
Original photographs, cropped for comparison. Vacuum condition and cleaning results are unaltered.
Internal housing
Dust removed from the internal housing.
Drag to compare. Use arrow keys when focused.
What cleaning can—and can’t—solve.
Removing trapped debris can help when suction loss or odors come from buildup. Normal cleaning can remove dirt, dust, grime, hair, residue and some removable transfer marks. It does not reverse scratches, gouges, worn plastic, discoloration or physical damage. Clear-Bin Refinishing is a separate optional cosmetic service, $12.00 with an eligible deep-clean package, with results dependent on condition and material. Cleaning cannot promise to remove every smell. Contaminated or worn parts may need replacement.
If the machine pulses, shuts off or has a broken component, tell us before booking. Repair diagnosis may be the right first step.
Before your appointment.
No repairs, parts, or additional charges without your approval.
Send your model and list the heads and tools you want included. Mention pet hair, unusual contamination, smells or performance problems. Bring the agreed accessories and the charger if battery performance is a concern. Drying time and the condition of the machine can affect when it is ready; we confirm timing with you rather than promise a same-day return.
Before you book.
Are cleaner heads included?
Cordless Complete Deep Clean includes the body, wand, cleaner head and up to two accessories. Upright Complete Deep Clean includes the integrated head, brushroll, accessible hose and up to two supplied accessories where applicable. Robot Complete Deep Clean includes its accompanying dock; robot/mop includes its washing station when supplied. Extra work is quoted and approved first.
Will you wash the motor or battery?
No. Electronic and powered parts are not immersed. Wet cleaning is limited to suitable components for the specific model, with full drying before reassembly.
Will cleaning fix a bad smell?
It can help when trapped buildup causes the smell. Results depend on the source, and contamination or damaged parts may require a different solution.
Will it remove every scratch?
No. Scratches, wear and permanent damage can remain. Optional Clear-Bin Refinishing is a separate $12.00 add-on, assessed for suitable surfaces, with results that may vary.
LOCAL, PERSONAL CARE
Your vacuum. Your next step.
That Suucks is independent and owner-operated. Colin personally works on the vacuums, drawing on 16 years of vacuum repair experience. We serve Murray, Salt Lake City and the surrounding Salt Lake Valley. Eligible authorized locker drop-offs and pickups need no appointment; personal handoffs do.
Send your model and the symptoms first. We confirm the arrangement, assess the machine, agree the work and price, then carry out and test the approved work. You receive a private status link for updates shared on your job. Collection and payment are arranged when the vacuum is ready.
Wait for confirmation and drop-off instructions before coming over. Pickup or return delivery can be discussed separately.